Connection Diagram; Rear Panel Overview - Alesis QX25 Guide D'utilisation Rapide

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

BOX CONTENTS
QX25
USB cable
Software DVD
Quickstart Guide
Safety Instructions & Warranty Information Booklet

CONNECTION DIAGRAM

Please refer to the following scenario for connecting the
QX25.
1.
Connect a USB cable from your computer to QX25.
The unit will be powered through the USB
connection. The first time you connect QX25 to your
computer, it will automatically install the necessary
drivers. (If you use a PC, a dialog box will appear
telling you the "new hardware" is ready to use.)
Alternatively, if you do not wish to use a computer in
your setup or if you wish to power QX25 externally,
please plug in a 5V DC, 100mA power adapter,
center-positive, 5.5mm barrel diameter.
2.
If you would like to use an external sound module,
connect a 5-pin MIDI cable from the KEYBOARD
MIDI OUT of QX25 to the MIDI IN of the external
device.

REAR PANEL OVERVIEW

1.
DC POWER ADAPTER INPUT –
Plug in a 5V DC, 100mA power
adapter,
center-positive,
barrel diameter (sold separately) if
you do not wish to power QX25
through the USB connection.
2.
POWER SWITCH – Turns the power
on/off. If you are using a power adapter (sold separately), set the switch to "POWER" when turning it on. If you
are powering it via its USB CONNECTION, set the switch to "USB" when turning it on.
3.
USB PORT – Plug a standard USB cable into this outlet and into the USB port of your computer. The
computer's USB port will provide power to QX25. This connection is used to send and receive MIDI data to
and from your computer and may also be used to send MIDI data from your computer to a device attached to
the MIDI OUT port of the QX25.
4.
KEYBOARD MIDI OUT – Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI IN of an
external device.
5.
SUSTAIN PEDAL INPUT – Connect a 1/4" TS sustain pedal (sold separately) to this input.
SUSTAIN PEDAL
5.5mm
5
3
COMPUTER
(not included)
(not included)
4
3
POWER ADAPTER
(not included)
EXTERNAL
SOUND
MODULE
(not included)
2
1

Publicité

Table des Matières
loading

Table des Matières