Proper Packing Of The Coffee Machine; Storage - Beko CEG7425B Manuel D'utilisation

Masquer les pouces Voir aussi pour CEG7425B:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7
Troubleshooting
7.4 Proper packing of
the coffee machine
In the event of a warranty claim,
pack the coffee machine into the
original carton using the original
packing material and proceed as
follows:
1. Empty the water tank (7), waste
container (5), drip tray (8) and
the coffee bean container (11).
Clean the coffee machine and all
parts. Insert the water tank and
the waste container back into
the coffee machine. Pack the
coffee machine and the drip tray
each into a plastic bag.
2. Put the lower styrofoam tray
into the box. Place the coffee
machine and the tray into the box,
wrap the the connecting cable
and insert it into the prescribed
styrofoam tray.
Fully Automatic Coffee Maker / User Manual
3. Place the upper styrofoam
tray on top so that the coffee
machine is so sitting correctly in
its prescribed tray. Lay the drip
tray in the prescribed tray and
close the box.
4. Finally seal the carton with
adhesive tape!

8. Storage

If you do not intend to use the
coffee machine for a prolonged
period, clean it as described in
section 6 in order to prevent
mould from building up. Mould is
harmful to health. Store the coffee
machine and all accessory parts in
a dry, clean and frost-free place
which is protected against direct
sunlight.
77 / 233 EN

Publicité

Table des Matières
loading

Table des Matières