Water Hardness; Hot Water Preparation - Beko CEG7425B Manuel D'utilisation

Operation and use
5
5.7 Setting and
storing the water
hardness
To set the previously determined
water hardness, proceed as fol-
lows: Switch to the menu function
by simultaneously pressing but-
tons 2 and 3 for approx. 3 seconds.
The function displays of the menu
will flash first in a blinking line,
then the current settings will be
displayed.
2 3
1. Then press key 3 repeatedly until
the required hardness degree is
set.
3
28 / 233 EN
The image below shows the
displays for the 4 possible hardness
degree settings.
Hardness Hardness
level 1 level 2
Soft Medium hard
2. Store the input by pressing "OK"
(6). All function displays of the
menu flash for approx. 3 seconds to
confirm. The appliance then returns
to the normal operating mode.
5.8 Hot water
preparation
A
Fully Automatic Coffee Maker / User Manual
Hardness Hardness
level 3
level 4
Hard Very hard
WARNING:
of scalding from hot
splashing water!
Hot water from the
steam nozzle can
cause scalding. Avoid
direct contact with
the skin.
6
Risk