Explanation Of The Symbols; Safety Instructions - Batavia MAXXPACK BT-CID001 7062505 Mode D'emploi

English
DEAR CUSTOMERS
This cordless impact driver is designed for
tightening and undoing screws.
Please familiarize yourself with the proper
usage of the device by reading and follow-
ing each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read all safety instructions!
This manual contains important informa-
tion on operating and handling the device.
Keep these operating instructions for fur-
ther reference. Please pass it on along with
the unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under
art. No: 7062517 (2Ah), 7062518 (4Ah) or
7063735 (5Ah). The charger is available
separately under art. No: 7062519 (1.65A) or
7063688 (2.4A).
These items are available online and in
participating stores.

1. Explanation of the symbols

Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury,
loss of life or damage to the tool in
case of non-observance of the
instructions in this manual.
Always wear hearing protection.
The effects of noise can cause
hearing loss.
Wear safety glasses. When
working with electric power tools,
sparks, splinters, chips and dust
particles may be generated and
these can cause loss of sight.
Electric power tool, protection
class II. This sign symbolises that
this unit corresponds to Protection
Class II. This means that the unit
is equipped with either reinforced
or double insulation between the
mains circuit and output voltage
or metal housing respectively.
4
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the
manufacturer confirms that this
Electric tool complies with the
applicable European directives.
Do not dispose of electric power
tools with domestic refuse.
2. Safety instructions for cordless
Impact drivers
General
2.1
• The tool/charger is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the tool/charger by a person
responsible for their safety.
• Ensure that children do not play with the
tool/charger.
• Ensure that the Forward/Reverse
switch (5) is in the middle (locking)
position before making any adjust-
ments or changing accessories as well
as when carrying or storing the tool.
• Do not work materials containing
asbestos (asbestos is considered
carcinogenic).
• Follow the dust-related national require-
ments for the materials you want to
work with.
• When using the machine, use safety
equipment including safety glasses or
shield, ear defenders, and safety gloves.
If operating the tool causes discomfort
in any way, stop immediately and review
your method of use.
• Battery chargers are for indoors use
only. Ensure that the power supply and
charger are protected against moisture
at all times.
• Ensure that the lighting is adequate.
• Ensure that the impact driver bit or
accessory is securely fixed in the bit
holder. Insecure accessories can be
ejected from the machine causing a
hazard.