Explanation Of The Symbols; Safety Instructions - Batavia MAXXPACK BT-CBID001 Mode D'emploi

English
DEAR CUSTOMERS
Instruction manuals provide valuable hints
for using your new device. They enable you
to use all functions, and they help you avoid
misunderstandings and prevent damage.
Please take the time to read this manual
carefully and keep it for future reference.

1. Explanation of the symbols

Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the
instructions in this manual.
Always wear hearing protection.
The effects of noise can cause
hearing loss.
Wear safety glasses. When working
with electric power tools, sparks,
splinters, chips and dust particles
may be generated and these can
cause loss of sight.
Electric power tool, protection
class II. This sign symbolises that
this unit corresponds to Protection
Class II. This means that the unit is
equipped with either reinforced or
double insulation between the
mains circuit and output voltage or
metal housing respectively.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the
manufacturer confirms that this
Electric tool complies with the
applicable European directives.
Do not dispose of electric power
tools with domestic refuse.
2. Safety instructions for cordless
Impact drivers
General
2.1
• The tool/charger is not intended for use
by persons (including children) with
4
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the tool/charger by a person
responsible for their safety.
• Ensure that children do not play with the
tool/charger.
• Ensure that the Forward/Reverse
switch (5) is in the middle (locking)
position before making any adjust-
ments or changing accessories as well
as when carrying or storing the tool.
• Do not work materials containing
asbestos (asbestos is considered
carcinogenic).
• Follow the dust-related national require-
ments for the materials you want to
work with.
• When using the machine, use safety
equipment including safety glasses or
shield, ear defenders, and safety gloves.
If operating the tool causes discomfort
in any way, stop immediately and review
your method of use.
• Battery chargers are for indoors use
only. Ensure that the power supply and
charger are protected against moisture
at all times.
• Ensure that the lighting is adequate.
• Ensure that the impact driver bit or
accessory is securely fixed in the bit
holder. Insecure accessories can be
ejected from the machine causing a
hazard.
• Only use bits and accessories, specifi-
cally designed for use with impact driv-
ers. Conventional bits and accessories
may shear off during use, or be other-
wise damaged, potentially ejecting
dangerous projectiles.
• Ensure that fasteners are suitable for
impact driver use. Screws that are not
suitable for high torque application may
be damaged.
• Bits get hot during operation, allow to
cool prior to handling them.
• Examine the bitholder regularly for
signs of wear or damage. Have dam-