Waring Commercial WMO120 Mode D'emploi page 22

How to remove and install the splatter guard,
which protects the stirrer blade from food splatter:
Warning: Before removing or installing the splatter guard, unplug the
unit from the power supply and allow it to cool.
To remove splatter guard:
1. Press in and pull down where
shown to release and drop
down front of splatter guard.
2. Pull splatter guard forward
to remove from oven.
3. Splatter guard is removed
from oven.
To reinstall splatter guard:
1. Insert rear posts of
splatter guard into holes
on back wall of oven.
2. Secure oven with one
hand, then push in and up
at area shown to reinstall
splatter guard.
3. Ensure that the splatter
guard is properly in place
before use.
22
thumb pressed here
thumb pressed here
thumb pressed here
thumb pressed here
thumb pressed here
thumb pressed here