Ready Mode; Door Open Mode; Pause Mode - Waring Commercial WMO120 Mode D'emploi

Masquer les pouces Voir aussi pour WMO120:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2) During Idle Mode, screen is blank.
3) By opening and then closing the oven door, the oven will exit
Idle Mode and enter Ready Mode.

READY MODE

1) In this mode, the oven is ready to either begin a Manual or
Preset Program Cook Mode.
2) Opening and closing the door while the oven is in Idle Mode
will put the oven into Ready Mode.
3) During Ready Mode, READY is displayed.
4) From Ready Mode, the oven can go into almost all of the
other modes.

DOOR OPEN MODE

1) While the door of the oven is open, the oven is in Door Open
Mode. This also allows for entry into Programming Mode.
2) Display is blank, but the fan and oven lamp are on.
3) If User Option OP:60 is selected and the door is opened
during operation, the oven will enter Pause Mode. Closing
the door will allow the Manual or Preset Program currently
running to continue.
4) If User Option OP:61 is selected, opening and closing the
door during operation will reset the oven and clear out any
information about the Manual or Preset Program currently
running.

PAUSE MODE

1) This mode allows the user to temporarily stop the cooking
cycle to inspect or stir food.
2) While in Manual Cook Mode, or Preset Program Cook Mode,
if the door is opened then closed, or if STOP is pressed, the
oven will enter Pause Mode.
3) While paused, screen will display the remaining cooking time.
4) Pause Mode reverts to Idle Mode in the same way as Ready
Mode, depending on User Option 4. Additionally, if STOP
is pressed, the oven will immediately enter Ready Mode.
If START is pressed, the oven will go into Working Mode.
12

Publicité

Table des Matières
loading

Table des Matières