Battery Removal - Waterpik WP-500 Série Mode D'emploi

10 10

BATTERY REMOVAL

1.
2.
3.
4.
Battery Removal
The product contains battery and/or recyclable electronic waste. In order to protect the environment, please do not dispose along with
household waste. When battery life ends, please dispose or recycle according to local administrative regulations.
Please contact local waste administrative department for any questions.
If you tend to dispose the battery on your own, please discharge battery fully before removal and follow below steps to remove battery:
1. Remove Reservoir
2. Remove Tip Rotator by prying it up with a small fat-head screwdriver
3. Remove 4 small Phillips head screws
4. Remove decorative trim piece and jet tip latch mechanism