Troubleshooting - SilverCrest SHSK 3.7 A1 Mode D'emploi

__NAS280611_Haarschneider_kompakt_B6.book Seite 19 Freitag, 4. November 2016 6:17 18

9. Troubleshooting

If your device fails to function as required, please try this checklist
first. Perhaps there is only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under any cir-
cumstances.
Fault
No function
The device cannot
be switched on.
Cutting performance
is deteriorating.
Battery cannot be
charged or the bat-
tery performance is
very low.
Possible causes / Action
• Has the device been connected to
the power supply?
• Inspect the connections.
• Is the battery empty?
• Is the battery empty?
• Blade unit 1 cleaned?
• Blade unit 1 oiled?
• New blade units 1 are available for
reorder.
The battery have reached the end of its
service life. The device with the installed
battery must be disposed of properly (see
chapter "Disposal" on page 18).
19
GB