Table des Matières
Publicité
EN
Install the appliance only in a niche of
stable, fixed kitchen furniture, standing
on a horizontal and levelled surface. All
corners of the niche should be at 90°,
otherwise the door will not be exactly
adjacent to the furniture in the corners.
Before installation make sure that the
furniture meets the specified dimen-
sions.
5 7
5 2
0 , 0
5 , 0
0 , 0
5 9
Ventilation
≥ 5
7 5
, 0
, 0
0 0
Observe the specified dimensions of
≥ 6
the ventilation openings to ensure the
normal functioning of the appliance.
If the opening sizes are smaller, the
device will turn on more often and for a
longer time, which will lead to increased
power consumption and overheating of
the compressor. As a result, the
compressor may fail.
The furniture for the installation should
be provided with unobstructed ventila-
tion.
The air enters through the inlets in the
base of the kitchen furniture and exits
above in the back area of the niche. The
area of the air inlets in the basement, in
the furniture for installation and under
the ceiling should be at least 200 cm² to
remove heated air.
For ventilation from the back of the
device, the distance to the wall must be
at least 40 mm.
The vents should not be blocked. They
should be regularly cleaned of dust.
10
Publicité
Table des Matières
