Power Hookup To Another Equipment Or Device - Technogym XT PRO Recline 600 Manuel De L'utilisateur

1.3 I
NSTALLATION AND ASSEMBLY

1.3.5 Power hookup to another equipment or device

The characteristics of Recline 600 allow two
equipments to be connected together.
Use the standard serial cable to connect the
two equipments. Insert the plugs in the
special sockets (close to the sockets for the
main power supply).
W
ARNING
Recline 600 can only be connected to another equipment of the same type, that is
to say to another Recline 600. The auxiliary inlet socket must not be used for other
purposes. Safety requires that you ensure that the grounded current on the main
power cord does not exceed 500 µA.
XT PRO line equipments can be connected
not only with each other but also with an
audio-video receiving device such as Cardio
Theater and Smartkey* reader.
Three connectors are installed on the back
of the control panel, specifically for making
these types of connections. The connectors
are furnished with a safety cover that
absolutely must not be removed if the
socket is not used.
Only the specialized personnel from
Technogym Technical Support Service are
authorized to remove the safety cover, during
installation. The removed cover must then
be kept by the user.
seriale
23
01325005
89