Technical Data - Husqvarna 426LST Manuel D'utilisation

• When you store and transport fuel always use
approved containers intended for this purpose.
• When you store the product for long periods the fuel
tank must be emptied. Contact your local petrol
station to find out where to dispose excess fuel.
Drain the tank into the appropriate containers and in
a well ventilated area.
• Ensure that the product is cleaned and that a
complete service is carried out before long-term
storage.

Technical data

Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Power / Max. engine output, acc. to ISO 8893, kW/hp @ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel system
Fuel tank capacity, US pint/l
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg
18
Technical data
3
• The transport guard must always be fitted to the
cutting attachment when the product is transported
or in storage.
• Secure the product during transport.
• In order to prevent unintentional start of the engine,
the spark plug cap must always be removed during
long-term storage if the product is not under close
supervision and when you perform all service
measures.
• Allow the product to cool before you put in i storage.
426LST
1.55/25.4
1.34/34
1.10/28
3000
11500
5500
0.87/1.17@ 7500
No
No
NGK CMR7H
0.024-0.028/0.6-0.7
0.026/0.65
12.6/5.7
430LS
1.80/29.5
1.5/38
1.03/26
3000
10000
6850
1.03/1.38@ 8500
No
No
NGK CMR7H-10
0.035-0.039/0.9-1.0
1.52/0.72
13.2/6.0
1189 - 001 - 08.07.2019