Design And Function - WIKA PG43SA-S Mode D'emploi

2. Design and function

Notes per pressure equipment directive
The instruments are defined as "pressure accessories" per pressure
equipment directive, chapter 1, article 2.5.
Applied standards
EN 837-2 Selection and installation recommendations for pressure
gauges
EN 837-3 Diaphragm and capsule pressure gauges, dimensions,
metrology, requirements and testing
Subject to technical modifications.
„
Further information:
„
- Internet address:
- Relevant data sheets:
- Application consultant:
2. Design and function
2.1 Description
The model PG43SA-S and PG43SA-C pressure gauges are
designed especially for the requirements of the food and beverage,
pharmaceutical and biotechnology industries.
The pressure gauge is particularly suitable for the special conditions
of CIP/SIP cleaning processes, such as chemical stability towards
cleaning liquids and high temperatures. The flush metal diaphragm
element is directly welded to the process connection. This guaran-
tees a crevice-free connection of process connection and diaphragm
element; additional internal sealings are not required.
In special versions, the models PG43SA-S and PG43SA-C are
autoclavable.
WIKA operating instructions pressure gauge, PG43SA-S, PG43SA-C
www.wika.de / www.wika.com
PM 04.15, PM 04.16
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
EN
5