d. Insert the cuff connector into the cradle and turn to lock into
position. Do not compress or restrict air flow through the tubing.
2. Secure the Cuff to the patient so that the Pod is located on the outside of
the patient's arm (rather than under the arm).
3. To insert the Pod into the Cradle, align the Cradle's red dot (inside,
lower left corner) to the Pod's
of the Pod to secure.
4. Ensure that the cuff hose is securely connected into the Pod/Cradle (see
figure):
5. Begin NBP measurements.
Carrying Pouch Patient Setup
In this setup (
patient's Carrying (telemetry) Pouch. The CL Extension Air Hose connects
the Pod/Cradle unit to the Cuff.
), the Pod is attached to the Cradle and is placed into the
symbol, then press down each end
865216
5