Axis A1001 Guide D'installation page 41

To view the admin pages for the network DHCP server, see the server's user
documentation.
• Hosted video services
To connect to a hosted video service, see the service provider's installation guide. For
information and help in finding a local service provider, go to www.axis.com/hosting
Assign an IP address using ARP/Ping
The device's IP address can be assigned using ARP/Ping. The command must be issued within 2
minutes of connecting power.
1. Acquire a free static IP address on the same network segment as the computer.
2. Locate the serial number (S/N) on the device label.
3. Open a command prompt and enter the following commands:
Linux/Unix syntax
arp -s <IP address> <serial number> temp
ping -s 408 <IP address>
Linux/Unix example
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
Windows syntax (this may require that you run the command prompt as an
administrator)
arp -s <IP address> <serial number>
ping -l 408 -t <IP address>
Windows example (this may require that you run the command prompt as an
administrator)
arp -s 192.168.0.125 00-40-8c-18-10-00
ping -l 408 -t 192.168.0.125
4. Restart the device by disconnecting and reconnecting the network connector.
5. Close the command prompt when the device responds with Reply from
192.168.0.125:... or similar.
6. Open a browser and type http://<IP address> in the address field.
Note
• To open a command prompt in Windows, open the Start menu and search for cmd.
• To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the
command prompt icon and select Run as administrator.
• To open a command prompt in Mac OS X, open the Terminal utility from Application >
Utilities.
AXIS A1001 Network Door Controller
41
EN