Axis A1001 Guide D'installation page 40

AXIS A1001 Network Door Controller
- AXIS Device Manager automatically searches for Axis devices on the network
and adds them to the list of devices.
- To manually add devices, go to Device management > Add devices. Select
which devices you want to add from the list, click Next, and then click Finish.
- To add devices from an IP range, go to Device management > Add devices
from IP range.
- To add a device from a specific IP address, go to Device management > Add
device from address.
6. To access the device from a browser, click the address link in the list.
Change the IP addresses of multiple devices
To speed up the process of assigning IP addresses, AXIS Device Manager suggests IP addresses
from a specified range.
1. In AXIS Device Manager, go to Device management.
2. Select the devices you want to configure and then click Assign IP address to selected
devices
3. In the Device maintenance dialog, click Yes.
4. Select Assign the following IP address range.
5. To change the suggested IP address range, enter the IP address range in the IP range
text field.
6. Click Next.
7. To change any of the IP addresses, select a device and click Edit IP.
8. Click Finish.
Other methods
The lists below show other methods available for assigning or discovering IP addresses.
Windows® ® ®
• UPnP™
UPnP automatically detects Axis devices and adds them to Network or My Network
Places.
Mac OS X® ® ® 10.4 or later
• Bonjour (applicable to browsers with support for Bonjour)
Navigate to the Bonjour bookmark in your browser, for example Safari, and click the link
to access the webpage.
All operating systems
• DHCP server
.
40