KitchenAid KSB5000 Manuel D'instructions page 8

OPERATING THE BLENDER
Remove the pitcher from the Blender
1
base in order to fill it with ingredients.
Pull the pitcher release lever to help
remove the pitcher. Grab the handle
firmly, and pull the pitcher straight
towards you to remove.
Align the top of the pitcher to slide
3
under the top of the base, and slide
pitcher forward into the housing. Ensure
that the pitcher goes in straight and is
secured in place.
8
Put ingredients in the pitcher. Add
2
liquids first, then soft foods, then ice or
frozen fruit last. Do not fill the pitcher
beyond the max fill line - especially
when using primarily liquids. Put the
lid on the pitcher spout first, then
push down on the side of the lid near
the handle, ensuring that the lid is on
straight. The Blender will not work
without the lid in place.
Ensure that the pitcher is fully in place
4
by making sure that the tab on the
pitcher release handle sits between the
two triangular notches on the base of
the pitcher. You will hear a click when
the pitcher is fully in place.
NOTE: There should be a half inch (1,27
cm) of platform evenly visible around the
pitcher when it's fully locked in place.