AEG X99464MK2 Manuel D'utilisation page 6

6 www.aeg.com
Signalling malfunctions:
- Valve obstruction
when the system fails to switch, for
mechanical reasons, from the suction
mode to filtering mode (or vice versa)
the hood will remain in OFF state and
the problem will be indicated by the
blinking of the central LEDs for speed;
- Electrical connection error
when the system detects problems with
the electrical connection, the hood will
remain in OFF state and the problem
will be indicated by the blinking of the
LEDs for speed 1 + speed 3.
In both cases, you can only use the
function LIGHTS.
To resume normal hood operation,
please contact the technical support
centre.
6. LIGHTING
The hood is equipped with a lighting system
based on LED technology.
The LEDs guarantee an optimum lighting,
a duration up to 10 times as long as the
traditional lamps and allow to save 90%
electrical energy.
Caution! Do not look directly into the
LED light.
For replacement, contact the technical
service.