Setup - Radiant CLOUDWARM Manuel D'installation Et D'utilisation

2.1.4. SETUP

ADD SEVERAL TRANSMITTERS
Should you need to add more transmitters, i.e. to
control multiple zones, proceed as follows:
1. Press on the dots (see fig. 1) on top right of the
interface of the App (in some Android devices
the dot icon may not appear; in this case, press
the button to the left of the HOME symbol of
the virtual menu);
2. Press "Device information" (see fig.1);
14
CLOUDWARM WIRED - RAD - ING - Manual - 1606.1
2. USE
fig. 1
3. Press "Add device" (see fig.2);
fig. 2