Schubert SR1 Mode D'emploi page 24

SR1
Congratulations!
In selecting the SCHUBERTH SR1 you have made a wise choice.
The SR1 is the result of the latest development and production
methods. With this helmet you have a quality product designed to
provide the highest level of safety and capability in road traffi c and
the best performance on the racetrack that will provide you with
much enjoyment.
We wish you safe riding.
F.-J. Görges
Head of Sales
SCHUBERTH GmbH
48
EN
E. Van Hoof
International Sales
SCHUBERTH GmbH
A. CORRECT USE OF THIS MANUAL
Please read this manual thoroughly to ensure that you obtain the
best protection from your helmet when motorcycling. To avoid
missing any aspect relevant to your safety, we recommend that you
read this manual in the order in which it appears.
Please note particularly the following symbols and conventions:
Warning: safety instructions
Note: advice
Tip: practical tips
Caution:
This helmet is not intended for use in the USA and Canada. The helmet has been inspected
and approved to the European ECE Standard and therefore does not conform to US and Canadian
regulations and requirements. It is only legal to use the helmet in countries in which the European
ECE Standard is valid. If you use the helmet in other countries, you will not in the event of injury
be entitled to make a claim for compensation before the US or Canadian courts or the courts of
other countries not bound by the ECE Standard.
Avertissement :
Ce casque n'est pas conçu pour être utilisé aux Etats-Unis ni au Canada. Il a été fabriqué,
contrôlé et homologué selon la norme européenne ECE. Par conséquent, il n'est pas conforme aux
prescriptions et exigences des Etats-Unis d'Amérique et du Canada. Il ne peut être utilisé que dans
les pays où la norme européenne ECE est applicable. En cas d'utilisation du casque dans d'autres
pays, aucun droit de dommages-intérêts ne peut être revendiqué devant les tribunaux des Etats-
Unis d'Amérique ou du Canada ou de pays tiers non assujettis à la norme ECE.
Note: We reserve the right to make alterations for purposes
of technical development without giving you express notice.
49