Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cancelling MIX
Press the 5 MIX button ; again.
"MIX OFF" appears briefly on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on
the CD.
Press the MENU button 9 for longer
than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Cancelling Scan and continuing listening
to a track
To end the scanning process,
press the MENU button 9.
The currently scanned track will then con-
tinue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button ;.
"RPT TRCK" appears briefly on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate RPT.
Cancelling repeat
If you want to cancel the repeat function,
press the 4 RPT button ; again.
"RPT OFF" appears briefly on the display
and the RPT symbol disappears. Normal
playback is then resumed.
Interrupting playback (PAUSE)
Press the 3 button ;.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button
3 ;.
Playback is continued.
Configuring the display
You can select from two display types for
CD mode:
•
Track number and time
•
Track number and playing time
To switch the display, press and hold
down the DISPL
er than two seconds.
Traffic announcements in CD
mode
If you wish to receive traffic announcements
in CD mode,
press the TRA•RDS button 7.
The priority for traffic announcements is ac-
tivated if the display shows the traffic jam
symbol. For further details, please read the
chapter entitled "Traffic information".
Ejecting a CD
Press the button 2.
The control panel opens out towards you.
Press the eject button < next to the
CD tray.
The CD is ejected.
Remove the CD and close the control
panel.
CD mode
button 8 for long-
1
Publicité
Chapitres
Table des Matières
