Playback Mode; Motion Detection - Hama Dashcam 30 Mode D'emploi

8.3 Playback mode

• Activate Playback operating mode by repeatedly pressing [MODE] (6).
appears at the lower-left edge of the screen.
• Use the navigation buttons [◄] (9) / [►] (5) to select the file you would like to play.
• Press [MENU] (8) for more options.
• Use the navigation buttons [◄] (9) / [►] (5) to navigate through the menu.
• Select the Delete menu item and confirm your selection by pressing [OK] (7).
• You can choose between Delete selection and Delete all.
• Confirm the subsequent confirmation prompt with OK, or select Cancel to cancel the operation.
• Press [MENU] (8) for more options, to alternatively go to the Lock menu item.
• Select the Lock menu item and confirm your selection by pressing [OK] (7).
• You can choose between Lock file, Lock all, Unlock file and Unlock all.
• Confirm the subsequent confirmation prompt with OK, or select Cancel to cancel the operation.
9. Settings
9.1 Video mode settings
• Switch to Video mode as described in section 8.1 Video mode.
• Press [MENU] (8) to go to the video settings.
• is shown at the upper-left edge of the screen.
• Use the navigation buttons [◄] (9) / [►] (5) to navigate through the menu.
• Confirm your selection by pressing [OK] (7).
9.1.1 Resolution
Select the desired resolution (1280X720 / 1920X1080) of the recorded video material.
• Navigate to the Resolution menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.1.2 Watermark
With the mode activated, a time and date stamp is added to every video file.
• Navigate to the Watermark menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).

9.1.3 Motion detection

With motion detection activated, video recording is automatically started when the camera senses
vibrations (for example, in the case of an accident).
9