Inserting A Microsd Card; Video Mode; Photo Mode; Playback Mode - Hama 60 Mode D'emploi

7.3. Inserting a microSD card

• Insert a microSD card into the microSD card slot (2) on the Dashcam.
• is shown on the display.
Note - Memory card full
Once the memory of the microSD card is full, the oldest video recording will be overwritten.
8. Modes

8.1 Video mode

• After switching on, the camera is in Video operating mode.
the screen.
• Alternatively, enable Video operating mode by repeatedly pressing [MODE] (8).
• Press [OK] (11) to start/stop video recording.
• The recording duration is displayed at the upper-left edge of the screen.

8.2 Photo mode

• Repeatedly press [MODE] (8) to activate Photo mode.
screen.
• Press [OK] (11) to take a picture.

8.3 Playback mode

• Repeatedly press [MODE] (8) to activate Playback mode.
screen.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the file you would like to play.
• Confirm your selection by pressing [OK] (11).
• Press [OK] (11) to start playing the video.
• Press and hold [MODE] (8) for about 3 seconds to delete a video file.
• Confirm the subsequent confirmation prompt with Delete.
• Press and hold [MODE] (8) for about 3 seconds to protect a video file.
• Confirm the subsequent confirmation prompt with Protect video.
9. Settings
9.1 Video mode settings
• Switch to Video mode as described in section 8.1 Video mode.
• Press and hold [MODE] (8) for about 3 seconds to access video settings.
is shown at the upper-right edge of the screen.
•
• Use the navigation buttons [▼] (9) / [▲] (10) to navigate through the menu.
• Confirm your selection by pressing [OK] (11).
8
appears at the upper-left edge of
appears at the upper-left edge of the
appears at the upper-left edge of the