Locking Function - Hama 60 Mode D'emploi

• Connect the microSD card to your PC using the SD card reader (included in delivery).
• Transfer the stored data to your PC to free up space on the memory card.

11. Locking function

Note
In the event of an accident, the administering of first aid and the safety of all involved have priority.
Note
• With the G-sensor activated – as described in Section 9.1.7 G-sensor – the video file is
automatically saved and overwriting of this data is prevented when the camera senses vibrations
(for example, in the case of an accident).
• If the sensor's vibration sensitivity setting is too low, it can happen that the data is not saved
despite vibration. To be on the safe side, save your data manually with the Save button.
To be sure your data is permanently stored, proceed as follows:
• Press [MODE] (8).
• Press and hold Power [
• Now remove the camera's microSD card.
Note
• Videos stored after pressing the Save button are stored under the designation 'LOKXXXXX'.
• Normal video files are stored under the designation 'MOV' and a consecutive number.
12. Factory settings
To reset the Dashcam to the factory default settings, proceed as follows:
• Switch off the Dashcam as described in 7.2 Switching on/off.
• Press and hold [Reset] (4) for about 3 seconds using a pointed object.
• Alternatively, you can restore the factory settings as described in Section 9.3.7 Factory settings.
• All settings you made are deleted.
Note
• Resetting to the factory default settings can solve some problems and malfunctions.
• However, all settings made previously are permanently deleted.
14
appears on the display.
] (6) for about 3 seconds to switch off the camera.