Audio Recording - Hama 60 Mode D'emploi

9.1.5 Watermark
With the mode activated, a time and date stamp is added to every video file.
• Navigate to the Watermark menu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).

9.1.6 Audio recording

With the mode activated, sound is recorded in addition to the video material.
• Navigate to the Audio recordingmenu item and confirm your selection by pressing [OK] (11). A
new overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).
9.1.7 G-sensor
With the G-sensor activated, the video file is automatically saved when vibrations occur (for example,
in the case of an accident). Here you set the sensor's sensitivity (2G / 4G / 8G) to vibrations.
Select Off to deactivate this function.
• Navigate to the G-sensor menu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).
9.2 Photo mode settings
• Switch to Photo mode as described in section 8.2 Photo mode.
• Press and hold [MODE] (8) for about 3 seconds to access photo settings.
• is shown at the upper-left edge of the screen.
• Use the navigation buttons [▼] (9) / [▲] (10) to navigate through the menu.
• Confirm your selection by pressing [OK] (11).
9.2.1 Resolution
Select the desired resolution (VGA - 12 megapixels) of the recorded photo material.
• Navigate to the Resolution menu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).
• is shown on the photo display.
10