Honeywell DY-012 Série Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HY-013 SERIES OPERATION INSTRUCTIONS
• Be sure your fan is in the OFF position by pressing the
off button. (
)
• Place the fan on a level and dry surface.
• Plug the power cord into a polarized 120 Volt AC wall outlet.
• To operate, press the appropriate speed control option: High (
Medium (
), or Low (
• To activate or disengage the fan oscillation, press the oscillation
button. (
) (Fig 14).
• Operate the automatic shut-off timer feature by turning the timer
knob to the desired setting of 10 to 120 minutes (Fig 15).
• To turn on the fan after
automatic shut-off, turn the
knob counterclockwise
to the ON position.
• To turn the fan off press
the Off button once. (
HY-023 SERIES OPERATION INSTRUCTIONS
• Be sure your fan is in the OFF position by pressing the
off button. (
)
• Place the fan on a level and dry surface.
• Plug the power cord into a polarized 120 Volt AC wall outlet.
• To turn the fan on, press the Power button ( ) located on
the left side of the control panel.
• To select fan speed, press the appropriate Speed Control
button until the desired speed is selected:
High ( ), Medium ( ), or Low ( ) (Fig. 16).
• To activate or disengage the fan oscillation, press the
oscillation button ( ). Press the Oscillation button again to
turn the Oscillation feature off (Fig 17).
4
) (Fig. 13).
Fig. 14
)
Fig. 13
),
Fig. 15
Fig. 16
Fig. 17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hy-013 sérieHy-023 série

Table des Matières