Troubleshooting; Specification - Iseki BBH130 Notice D'utilisation

The common faults
The engine cannot be started
Engine flameout midway
Strange noise
Blade destroyed
Belt creep
The material grinding not sufficient
Model:
Max. Chipping Capacity*:
Max. Blade Speed:
Engine Type:
Displacement:
Fuel Volume:
Oil Volume:
Starting System:
Fuel Type:
Carton Size:
Attachment:
* Maximum chipping capacity is based on tests conducted on Bamboo with 90% moisture content and paulownia trees with 80% moisture
content. The actual chipping capacity will depend on hardness and moisture content of the chipping material.
14
546336.B.9

Troubleshooting

Specification

BBH130
Ø 100mm
2530r/min
Honda GX390 (Refer to owner's manual for engine specifications)
389cm
3
6.5L
1.1L(10W-30)
Recoil
Clean Unleaded Gasoline
1100*680*1600mm
Engine manual, toolkit, gloves and safety glasses
Elimination method
Read the engine users' manual
Check the fuel ON-OFF, see if it's ON
Check if for fuel and lubrication oil
Check the emergency stop button
Connect wire onto Spark Plug
Clean Spark Plug
Replace Spark Plug
Clear any debris in inlet chute or blade housing
Check if the safety switch is reset and if interlocking switches are
connected properly.
Check if the engine is stopped by overloading Check if something
blocked in the chipping hopper
Check if the safety switch is reset and if interlocking switches are
connected properly.
Check if there is enough fuel and lubrication oil
Stop the machine and check if any fasteners are loose, if not get it
checked by an authorised dealer
Consult an authorised dealer for repair or replacement of the blades
Refer maintenance section of the manual to check the belt.
Get the machine checked by an authorised dealer for any repairs.
Consult an authorised dealer to adjust the blade settings.
Original version