Publicité
Les langues disponibles
Les langues disponibles
3
5
For further information about our products and our wide range of
accessories please see:
Safety Instructions
Safe work with this machine is only possible if you read
this operating instruction and follow them strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training.
If the connection cable gets damaged or cut during use,
do not touch it, but immediately pull the plug out of the
socket, Never use the tool with a damaged connection
cable.
The tool must neither be wet nor used in humid
environment.
Do not use the tool near explosive materials.
Do not work with materials containing asbestos.
Modifications of the tool are prohibited.
Always check the tool, cable and plug before use.
Have damages only repaired by specialists. Only insert the plug into
the socket when the tool switch is off.
When the machine runs outside, always use a protection switch (30 mA
max.) against fault current.
Pull the plug out of the socket and make sure is switched off when the
machine is not under supervision, e.g. in case of putting up and
4
6
www.eibenstock.com
13
Publicité
