Special Programmes; Temperature Selection - Beko WMB 71444 HPTLA Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Hand wash
Use this programme to wash your woolen/delicate clothes
that bear "not machine- washable" tags and for which hand
wash is recommended. It washes laundry with a very gentle
washing action to not to damage clothes.
• Daily Express
Use this programme to wash your lightly soiled cotton
clothes in a short time.
• Super short express
Use this programme to wash your little amount of lightly
soiled cotton clothes in a short time.
• Darkcare
Use this programme to wash your dark coloured laundry
or the laundry that you do not want it get faded. Washing
is performed with little mechanic action and at low
temperatures. It is recommended to use liquid detergent or
woolen shampoo for dark coloured laundry.
• Mix 40
Use this programme to wash your cotton and synthetic
clothes together without sorting them.
• Shirts
Use this programme to wash the shirts made of cotton,
synthetic and synthetic blended fabrics together.
• Freshen up
Use this programme to remove the odour on the laundry that
are worn only for once and do not contain any stains or dirt.
• eco Clean
Use this programme, which is much more sensitive to
environment and natural resources, to wash your lightly
soiled and unstained cotton laundry (max. 3.5 kg) in a short
time and economically.
C
It is recommended to use liquid detergent or gel
washing detergent.
• Self Clean
Use this programme regularly (once in every 1-2 months) to
clean the drum and provide the required hygiene. Run the
programme without any laundry in the machine. To obtain
better results, put powder limescale remover for washing
machines into the detergent compartment II. When the
programme is over, leave the loading door ajar so that the
inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance
programme.
C
Do not run the programme when there is something in
the machine. If you try to do so, the machine detects
that there is a load inside and aborts the programme.

4.7 Special programmes

For specific applications, select any of the following
programmes.
• Rinse
Use this programme when you want to rinse or starch
separately.
• Spin + Drain
Use this programme to apply an additional spin cycle for
your laundry or to drain the water in the machine.
Before selecting this programme, select the desired spin
speed and press Start / Pause / Cancel button. The machine
will spin the laundry with the set spin speed and drain the
27 / EN
water coming out of them.
If you wish to drain only the water without spinning your
laundry, select the Pump+Spin programme and then select
the No Spin function with the help of Spin Speed Adjustment
button. Press Start / Pause / Cancel button.
C
Use a lower spin speed for delicate laundries.

4.8 Temperature selection

Whenever a new programme is selected, the maximum
temperature for the selected programme appears on the
temperature indicator.
To decrease the temperature, press the Temperature
Adjustment button. Temperature decreases with increments
of 10° and finally, "-" symbol indicating the cold wash option
appears on the display.
C
If you scroll to cold wash option and press Temperature
Adjustment button again, the recommended
temperature for the selected programme appears on
the display. Press the Temperature Adjustment button
again to decrease the temperature.
Economy symbol
Indicates the programmes and temperatures that provide
energy savings.
C
Economy symbol can not be selected in Intensive and
Hygiene programmes since washing is performed in
long times and at high temperatures in order to provide
hygiene. Similarly, Economy symbol can not be selected
in Baby, Refresh, Drum Cleaning, Spin and Rinse
programmes as well.
4.9 Spin speed selection
Whenever a new programme is selected, the recommended
spin speed of the selected programme is displayed on the
spin speed indicator.
To decrease the spin speed, press the Spin Speed
Adjustment button. Spin speed decreases gradually. Then,
depending on the model of the product, "Rinse Hold" and
"No Spin" options appear on the display. See "Auxiliary
function selection" section for explanations of these options.
C
Rinse Hold option is indicated with "
No Spin option is indicated with "
" symbol and
" symbol.
Washing Machine / User's Manual

Publicité

Table des Matières
loading

Table des Matières