Hydraulic Connection1/2; Electrical Connection - Jaga Dynamic Clima Beam T 20 Instructions D'installation

6.3. HYDRAULIC CONNECTION 1/2"
Connect the device to the hydraulic system by using the specified inlet/ outlet connections. Make
sure that the connections are air tight, use a sealant for this. The coil is equipped with a de-aerater.
2-pipe connection : Heating or Cooling
T 20
R
15.3
A: supply - R: return
6.4. ELECTRICAL CONNECTION
Jaga dynamic product controller (jdpc)
By default, the jaga clima beam is equipped with the jdpc (dpc.kb51). this controller is connected and
pre-programmed.
1
Pre-assembled, to be connected by installer.
A
6.8
5
3
Power Supply
Input: 110-240V
Output: 12V
230 V
25.3
50 Hz
T 21
R A
3
16.8
5
EN
53