Used Symbols - Jaga Dynamic Clima Beam T 20 Instructions D'installation

– always supervise children to ensure that they do not play with the device. Please read the user
manual carefully
MAINTENANCE
– m aintaining the device is very important to ensure it works correctly. Maintenance must be performed
on a regular basis depending on the use and function of the room where the device is installed
– e ngage only qualified people to perform the maintenance work
– o nly use original replacement parts
– c over: clean with a soft moist cloth
– c over: do not use solvent based products or cleaning agents
DISMANTLE THE DEVICE
Jaga N.V. always focuses a lot of attention on protecting the environment.
If the device is dismantled, it is important to observe the following procedures:
– the device may only be dismantled by a company that is qualified to remove the waste from machi-
nes/products
– the device as a whole is composed of material considered to be secondary raw materials and the
following condition must be complied with:
– a device that contains antifreeze must be dismantled in a environmentally conscious manner and
must not be handled as ordinary waste.
– the electronic components (electrolytic capacitors) are considered as special waste and must be
removed and transported by an organisation that is authorised to collect such waste.
– the tubing insulation is made from polyurethane foam. Polyurethane foam mesh and sound-insula-
ting coating foam must be removed and treated like municipal waste
3. USED SYMBOLS
danger
danger: electrical hazard
danger: hot surfaces
danger: moving parts
danger: sharp edges / components
attention: important warning
enviromental safeguard
vdc - direct current
vac - alternating current
48