After Using The Appliance - Bosch MSM6 Série Mode D'emploi

Operation
Blade: For cutting meat, hard cheese,
onions, herbs, garlic, fruit, vegetables, nuts
and almonds. Always observe the maximum
quantities in the table. X Fig. C
Ice crusher blade: For crushing ice cubes
(crushed ice). Optimum processing quantity:
4-6 ice cubes.
Warning!
■ The universal cutter must be completely
assembled before use!
■ Before cutting meat, remove gristle,
bones and sinews.
■ The universal cutter is not suitable for
cutting very hard items (coffee beans,
radishes, nutmeg) and frozen food
(fruit, etc.).
X Fig. B
■ Place universal cutter on a smooth,
clean work surface and press into
position.
■ Insert blade.
Warning!
The blade must be positioned evenly in the
universal cutter. X Fig. B-3
■ Add food.
■ Place gear attachment on the universal
cutter and rotate in a clockwise direction
until it clicks into position.
■ Place the base unit on the gear
attachment and press until it clicks into
position.
■ Connect the mains plug.
■ Hold the base unit and universal cutter
firmly and switch on the appliance
(Turbo speed).
■ Release the On button after processing.

After using the appliance

■ Disconnect the mains plug.
■ Hold down both release buttons and
remove the base unit.
■ Rotate the gear attachment
anticlockwise and remove.
■ Take hold of the blade by the plastic
handle and take out.
■ Place the lid on the universal cutter to
keep in the processed ingredients.
Cleaning
Warning!
Never immerse the gear attachment in
liquids and do not clean under running
water or in the dishwasher.
■ Universal cutter and blade are
dishwasher-safe.
■ Wipe the attachment with a damp cloth
only.
Whisk
(depending on the model)
Please fold out the illustrated pages.
X Fig. A
6 Gear attachment
7 Whisk
If the whisk is not included with the hand
blender, it can be ordered from customer
service (order no. 657379).
Operation
For whipping cream, beating egg whites
and milk froth from hot (max. 70°C)
and cold milk (max. 8°C) as well as for
preparing sauces and desserts.
W Risk of scalding!
When processing hot milk, use a tall,
narrow receptacle for blending. Hot milk
may splash and scald you.
X Fig. D
■ Put the food in the blender jug.
■ Place the base unit on the gear
attachment and press until it clicks into
position.
■ Insert the whisk into the gear
attachment and lock into position.
Warning!
Never insert the whisk into the base unit
without the gear attachment. X Fig. D-3
■ Set the required speed with the speed
control (high speed recommended)
■ Take hold of the base unit and blender
jug and press the On button.
■ Release the On button after processing.
Whisk en
7