After Using The Appliance - Bosch MaxoMixx MSM8 Notice D'utilisation

MSM8_Zubehör 1 mit VC_alle.book Seite 7 Dienstag, 17. Februar 2015 11:36 11
Operation
The blade is sharp and can cause
injury!
The universal cutter must be completely
assembled before use!
Never grip the blade in the universal cutter.
Take hold of the universal cutter blade by
the plastic handle only.
Do not touch blade with bare hands.
Clean them with a brush.
Universal cutter with blade
The universal cutter with cutter blade is suitable
for cutting meat, hard cheese, onions, herbs,
garlic, fruit, vegetables, nuts, almonds.
With the universal cutter XL use the appliance
at full power to prepare honey spread
(according to the recipe see Fig.
Always observe the maximum quantities and
processing times in the table (Fig.
Caution!
Before cutting meat, remove gristle, bones and
sinews.
The universal cutter with cutter blades is not
suitable for cutting very hard food (coffee
beans, radishes, nutmeg) and frozen food (fruit,
etc.).

Fig. – with cutter blade (sizes L and XL)
Fig.  – with ice crusher blade (size L only)
Place the universal cutter on a smooth,

clean work surface and press.
Insert the blade.

Add food.

Warning!
Blade must sit straight in the universal cutter so
that the attachment sits correctly (Fig. = 
Place the attachment on the universal

cutter and rotate in a clockwise direction
until it "clicks" into position.
Place the base unit on the attachment

and lock into position.
Insert the mains plug.

Hold the base unit and universal cutter

firmly and switch on the appliance
(turbo speed).
Release the On button after processing.

Robert Bosch Hausgeräte GmbH

After using the appliance

Remove mains plug.

Press the release buttons and remove

the base unit from the attachment.
Rotate the attachment in an anti-clockwise

direction and remove from the universal
cutter.
Take hold of the blade by the plastic handle

and take out.
Place the lid on the universal cutter to keep

in the processed ingredients.
Universal cutter with Vario set
(only size XL)
The universal cutter with Vario set is suitable
for cutting hard, dry food (e.g. chocolate, nuts,
almonds, Parmesan) or for crushing ice cubes
into small (S), medium (M) or large (L) pieces.
 ).
The size is specified by positioning the marks
S, M or L on the Vario filter insert when
 ).
inserting it into the Vario holder.
Information and recommendations concerning
settings, quantities and processing times can
be found in the table (Fig.
Fig. 
Place the universal cutter on a smooth,

clean work surface and press.
Insert Vario holder into the universal cutter.

Pegs on the universal cutter must be
located in the grooves of the holder.
Place Vario filter insert on the universal

cutter.
The marks (S/M/L must be positioned
above the peg of the universal cutter
according to the required degree of
cutting (Fig.
Insert Vario blade.

Add food.
 -3).

/
Warning!
Vario blade must sit straight in the Vario filter
insert so that the attachment sits correctly
(Fig.  -3a).
Place attachment on the Vario filter insert

and turn clockwise until it clicks into
position.
Place the base unit on the attachment

and lock into position.
Insert the mains plug.

 ).
 -2)).
en
7