Baninni VICINO BNSF003 Mode D'emploi page 8

1. Place the 4 width controls in the
fence (top and bottom).
3. Tighten the bottom controls, lea-
ving the gate vertical.
5. Check the 4 regulators, making sure that the gate is set up securely.
INSTALLATION
2. Place the fence where you want to
install it, place the rubber against the
surface (width larger than 3cm).
4. Screw in the upper width regulators,
let the lock close smoothly.
Tighten the regulator firmly
on the surface.
Installed height
77 cm.