Recording Method - Panasonic DG-DV2500E Mode D'emploi

RECORDING
Remote controller
PAUSE button REC button
A.DUB PAUSE REC
F.REV F.ADV
PLAY
PLAY
button
REW FF
STOP
STOP INDEX INDEX
–
button
VEQ3533
Memo
• If recording has been
paused for an extended
period of time, the unit
will automatically go into
the STOP mode to pro-
tect the tape.
• This unit cannot perform
editing functions.
Memo
Audio recording level
PCM audio recording level of DV-format VTRs can be divided into 2 main groups:
1) The group that uses full scale -20dB as the standard level, to which this unit belongs.
2) The group that uses full scale -12dB as the standard level.
When a tape recorded with this unit is played on a VTR based on full scale -12dB, the volume is
decreased by about 8dB. This is not a malfunction.
POWER
+ MIC
1.
Load the cassette.
• Before loading the cassette, please check that the rear slide of
the cassette is pushed to REC.
¥ The Main unit is powered on.
2.
Start recording.
• Hold down the REC button and press the PLAY button.
3.
Pause recording.
• Press the PAUSE button.
4.
Resume recording.
• Press the PAUSE button or press the PLAY button while holding
down the REC button.
5.
Stop recording.
• Press the STOP button.
Recording index signals
When the INDEX WRITE item of the SYSTEM menu is set as
ON, an index signal is recorded at the starting position of re-
cording.
In the PLAYBACK mode, the position where the index signal is
recorded can be detected. (Index search)
During recording, please press the REC button to record
the index signal.
* Please allow at least an interval of 1 minute between recording of
index signals.
Recording of index signals after tape recording is not possible.
– Recording method –
Main unit
A.DUB
DVCAM
AG-DV2500
1 / 3
REMOTE INPUT CH
OFF LINE 2 / 4
AUDIO
9PIN WIRELESS DV S-VIDEO
REC PLAY
button button
REC PLAY
NTSC PAL REC INH.
REW
STOP
STOP button
EJECT
MENU
PAUSE
PAUSE
SET
button
FF
E-37