Fein GSZ4-280EL Mode D'emploi page 20

OBJ_BUCH-0000000187-001.book Page 20 Thursday, January 29, 2015 1:11 PM
en
20
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
For all work or when changing application tools, always wear protective gloves.
CAUTION
Danger of injury from the sharp edges of the application tools. Application
tools can become very hot while working. Danger of burns!
Replacing the collet (figure 4).
Hold the spindle in place using an open-end
wrench (size 17 mm) and unscrew the collet
using another open-end wrench (size
13 mm).
Replace the collet and and tighten it using the
open-end wrench (size 13 mm).
Fig. 4
Open-end wrench
Collet
17 mm
2.
3.
4.
Collet
13 mm
1.