Adjusting The Handle; Technical Data - Titan Tool Elite 3000 Mode D'emploi

DESCRIPTION OF UNIT
3.4

ADJUSTING THE HANDLE

The handle can be extended for easier transport. Pull the
handle until the snap buttons (1) hold the handle in place.
To retract, push the snap buttons and push the handle back in.
1
TRANSPORTATION IN A VEHICLE
Secure the unit in the vehicle by means of suitable fasteners.
The device can be placed on its side if necessary. In this case,
please ensure that no attachments are damaged.
Attention: Paint or solvent residues can escape from the
connections!
12
1
1
1
3.5

TECHNICAL DATA

Voltage :
Fuses :
Power cord length:
Max. current consumption:
Rated input of device:
Max. operating pressure :
Volume flow at 1800 PSI (120 bar) 0.60 gal/min
Max. tip size:
Max. temperature of the coating
material :
Max. viscosity :
Empty weight :
Hydraulic oil filling quantity :
Hydraulics housing
Gears (grease)
Max. vibration at the spraygun :
Max. sound pressure level:
* Place of measurement: 1 m distance from unit and 1.60
m above floor, 12 MPa (120 bar) operating pressure,
reverberant floor
ELITE 3000
120 V AC, 50/60 Hz
16 A time-lag
6 m long, 3 x 1.5 mm²
11 A
1.3 kW
3300 PSI (22.8 MPa)
0.025"
109ºF
20,000 mPas
90 lbs
1.3 liter
45 g
lower than 2.5 m/s²
75 dB (A)*