Caracteristiques Techniques - Ecler EVO4 Manuel Utilisateur

11. CARACTERISTIQUES TECHNIQUES

 AD/DA 24 bits converter 96kHz
 32/64bits DSP engine.
 Frequency response -1dB (-3dB):
Line:10Hz – (47,5kHz)
Micro: 10Hz – (47,5kHz)
Phono: RIAA  0.5dB (20Hz – 20kHz)
 Input sensitivity/Impedance:
Line: 0dBV/20k
Phono:-40dBV/50k
Micro: -50 to -30dBV / >1k
 Output level/Min. Load:
OUT1: 0dBV(+6 dBV hard configurable) / >600
OUT2: 0dBV(+6 dBV hard configurable) / >600
Output Limiter on OUT1: -10dBV to +10dBV compressor, password protected.
REC: 0dBV/10k
Headphones: 0,2W/200, 1%THD
Midi: USB / Din 5 180º
 THD+N:
Line:<0,008%
Phono:<0,01%
Micro:<0,02%
 Signal/N. Ratio:
Line:>97dB
Phono:>94dB
Micro:>92dB
 CMRR: Micro:>70dB@1kHz
 Shape: adjustable on Xfader & Faders
 BPM: automatic from 60 to 220 bpm in 6 ranges, internal or MIDI clock reference.
 Tones:
BASS -30/+10dB (200Hz)
MID -25/+10dB (200 & 6,5kHz)
TREBLE -30/+10dB (6,5kHz)
 Built in squelch on unused channels.
 Two independent loop sampler, 8+8 sec. max.
 Phantom voltage: +17,5VDC/5mA max.
 Input Gain: from - to +10dB
 Mains: 90-264VAC 47-63Hz
 Power consumption: 31VA
 Dimensions: 370x320x80mm
 Weight: 5kg
* Specifications and appearance are subjected to change without notice. Since the software is
upgradeable, some values may differ from one version to another due to improvements.
24