dirna Bergstrom bycool blue line FLAT 24V Instructions De Montage page 28

FLAT
ES
EN
Connect cabling boxes and pipes, through
16
the rear part of the Bycool as indicated.
Place tank support on the most suitable
17
lower part of the rear area of the cab. Mark
and drill Ø 9 on the cab bearing in mind the
vertical position of the support. Minimum
(6) fastening drill holes.
Place M6 rivet nuts and fix the support with
18
M6/100x30 screws.
(*) – Where it does not lean on the even part,
place a 10mm separator and screw M6/100
x 40.
4-way box
Pump impulsion pipe
Pipes marked with white tape
Rivet nut
28
Air conditioning for vehicles
Allen screw 6/100x30
Grower washer Ø 6
Flat washer Ø 6
(4) Supports
Tank
6/100x30
Grower washer Ø 6
Flat washer Ø 8
Support
Rear part cab
6/100x40 (*)
10 mm separator (*)
Rear part cab (*)
2-way box
Return pipe
17