Before Starting Work; During Work; Operation Start - Gaspardo PRIMAVERA 400 Manuel D'emploi Et Entretien

Masquer les pouces Voir aussi pour PRIMAVERA 400:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH

4.13 BEFORE STARTING WORK

IMPORTANT
Before operating the equipment, carefully check that the va-
rious working parts (hopper, doser, distributor, seed delivery
tubes, coulters, blower and its tubes) are in perfect condition
and free of foreign bodies.
IMPORTANT
Carrying out the dosing test:
MECHANICAL VERSION - See chapter
ELECTRIC VERSION -
to rotate the dosing devices, follow the
instructions provided in the Operation and Maintenance Manual
of the Electrical Distribution Control.
ATTENTION
MAXIMUM QUANTITY OF PRODUCT DISTRIBUTED
The actual quantity of product that the pneumatic system
on the machine can dispense depends on the drill width and
the working speed.

4.14 OPERATION START

WARNING!
Remove the safety pins and lift the planting unit so that it comple-
tely clears the ground before handling the side frames (Fig. 66).
IMPORTANT
For a successful seeding work it is useful to seed on a small
stretch and check that the seeds are regularly distributed in
the ground.
USE AND MAINTENANCE
4.3.3.

4.15 DURING WORK

Maintain e seeding speed compatible with type and cultivation
of the soil in order to avoid breakages or damage.
- The form dimensions and material of the drive shaft elastic
pins have been chosen for safety. The use of pins not original
or more resistant, could cause serious damage to the seeding
machine.
- Avoid curves with the machine grounded, neither work in
reverse.
Always lift it when changing direction or reversing.
harmful to the belt.
- Maintain a seeding speed compatible with type and cultivation
of the soil in order to avoid breakages or damage.
- Lower the seed drill when the tractor is in forward gear, to
avoid clogging or damage to the planter shoes; for the same
reason the tractor should not reverse when the seed drill is on
the ground.
- A high seed moisture content, especially if the seed is dres-
sed, can cause clogging in the distribution.
- Never leave the seeds in the hopper for a long time, and,
before starting work, make sure the hopper, distributors and
seed delivery tubes are not excessively damp.
- Make sure that no foreign material (rope, sack paper) enters
the storage tank when seed is being loaded.
The equipment can transport treated chemical substances
together. Do not allow children, people, pets to come near
the equipment.
Keep away from the seed storage tank and refrain from at-
tempting to open it when the equipment is working or about
to begin working.
CAUTION
CAUTELA
DANGER
cod. G19503101

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Primavera 450Primavera 500Primavera 600

Table des Matières