Oil Cooling - Gaspardo PRIMAVERA 400 Manuel D'emploi Et Entretien

Masquer les pouces Voir aussi pour PRIMAVERA 400:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Operation description
Starting up
Check the multiplier oil level and top up if neces-
sary (ESSO SAE W80-90)
ATTENTION
When it is not intended to distribute product, but rather to use
only the equipment to which it is applied, disconnect the pump
in the special attachment.
BLOWER PUMP CONTROL
Model
Type Product
Normal seed
PRIMAVERA
Small seeds
The values reported are only meant as a guide, as the type of
Dependent system
Independent system
NOTES:
placed correctly in the furrow. If the seeds are being placed
outside the furrow, reduce the rpm of the fan.
It is strictly forbidden to touch act on the dowel (3, Fig. 40) for
any reason, as this would unset the system and could lead to
the motor or pump breaking.
cod. G19503101
Blower
(r.p.m.)
WARNING
USE AND MAINTENANCE
Table 4
Pressure
(bar)
170÷180
90÷100

OIL COOLING

in the system and the capacity of the tank should be appro-
ximately 1:2.
- Always keep oils and grease out of reach of children.
- Always read warnings and precautions indicated on the
containers carefully.
- Avoid skin-contact.
- After use wash the equipment thoroughly.
- Treat the used oils and polluting liquids in conformity with
the laws in force.
The Manufacturer declines all responsibility due to negligence
and non-observance of these rules.
C
A
B
2
1
the ratio between the volume of oil
ATTENTION
ENGLISH
RAPP. 1 : 3
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Primavera 450Primavera 500Primavera 600

Table des Matières