Menu Item > Start Download; Menu Item > Language; Menu Item > Password; Menu Item > Set Time / Date - Bartec BAT VGA pro Manuel D'installation

Operator´s manual for BAT VGA pro
Version 1.1
5.1.1 Menu item
Use this item to transfer your own software to the display terminal. The customer-specific
software can be downloaded into the display terminal with the aid of a special tool package
via the serial interface of an IBM compatible PC.
Press "ENTER" to select this menu item.
Enter your password to start downloading.
Press "ESC" to quit when you have finished.
5.1.2 Menu item
Press "ENTER" to select this menu item.
All available languages will then be displayed.
Press "Enter" to select the language you want.
5.1.3 Menu item
Press "ENTER" to select this menu item.
Having first entered the current password, you can alter it at will.
Confirming your changes will return you to the SETUP menu.
5.1.4 Menu item
Press "ENTER" to select this menu item.
Enter the password and then use the cursor keys to change the time and date.
Press "ENTER" to confirm your new time and date.
5.1.5 Menu item
Press "ENTER" to select this menu item.
Having entered the password, you can enter a new station number using the numerical
keypad.
The substation number is used to clearly identify the display terminal when downloading
programs and projects.
Press "ENTER" to save the new number to memory.
5.1.6
Menu item
The system programs are used for diagnosis and servicing.
These programs are not required for PC Terminal operation.
E_BMS00680_Rev7.doc • Operator´s manual for BAT VGA pro • Revision 7 / Status: 29. January 2004 • Technical data subject to change
> Start download
> Language
> Password
> Set time / date
> Set station number
> System program
Page 5 4
<
<
<
<
<
<