Interbus Interface - Bartec BAT VGA pro Manuel D'installation

Operator´s manual for BAT VGA pro
Version 1.1
4.6

INTERBUS interface

Connection of a controller via a INTERBUS interface of the display terminal.
INTERBUS module
Terminal compartment of the terminal
See the interface description from the controller manufacturer for the relevant pin assignment of the controller.
E_BMS00680_Rev7.doc • Operator´s manual for BAT VGA pro • Revision 7 / Status: 29. January 2004 • Technical data subject to change
to activating the output circuit
( terminal 7 up to terminal 12 )
Page 5 0
Controller or
to other display terminals