Section 3 − Specifications; Included With Your Unit; Specifications; Serial Number And Rating Label Location - Hobart Welders EZ-TIG 165I Manuel Du Propriétaire

3-1. Included with Your Unit

7
6
5

3-2. Specifications

Rated Output at 20%
Duty Cycle
Mode
AC 150 Amps at 16 Volts
DC 150 Amps at 16 Volts
* () While idling.

3-3. Serial Number And Rating Label Location

The serial number and rating information for the power source is located on the rear of the machine. Use the rating labels to determine input power
requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
SECTION 3 − SPECIFICATIONS
1
4
Rated Input,
60 HZ, Single-Phase
230 V - 21 A - (.64)*
230 V - 23 A - (.50)*
2
3
KVA KW
4.9 - (.04)* 3.6 - (.02)*
5.3 - (.04)* 3.9 - (.02)*
1 Welding Power Source
2 5 ft (1.5 m) Primary Cord
With Plug
3 Gas Hose
4 Gas Regulator
5 12 ft (3.7 m) Work Cable
With Clamp
6 Air-Cooled 150 Amp TIG
Torch with 12-1/2 ft (3.8 m)
Cable
7 RFCS−RJ45 Foot Control
.
Some assembly is required.
For options and accessories see
back of book or contact your dis-
tributor.
Ref. 805 467 -A / 805 158-A
Welding
Amperage Range
Max. OCV
10−165 80
10−165 80
OM-245 020 Page 11