Software Upgrade - Samsung HW-F850 Mode D'emploi

functions
TV
MUSIC NEWS DRAMA
CINEMA SPORTS GAME
3D SOUND+ 3D SOUND+ STANDARD STANDARD STANDARD
ASC ASC

SOFTWARE UPGRADE

Samsung may offer upgrades for the Crystal Surround Air Track's
system firmware in the future.
If an upgrade is offered, you can upgrade the firmware by
connecting a USB drive with the firmware upgrade stored on it to the
USB port on your Air Track.
Note that if there are multiple upgrade files, you must load them onto
the USB drive singly and use them to upgrade the firmware one at a
time.
Please visit Samsung.com or contact the Samsung call centre to
receive more information about downloading upgrades files.

Insert a USB drive containing the firmware upgrade into the USB port on the main unit.

Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will
turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.

Once the software upgrade is completed, turn off the product and then press and hold the () button for a
while to reset the product.

If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.

For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file
system.

Depending on the manufacturer, some USB devices may not be supported.
24
Using the Sound Effect function
You can select from 7 different sound modes - MUSIC, NEWS, DRAMA,
CINEMA, SPORTS, GAME and STANDARD (Original Sound) - depending on
the type of sources you want to enjoy.
Press MUSIC, NEWS, DRAMA, CINEMA, SPORTS, GAME on the remote
control.
• Select the STANDARD mode if you want to enjoy the original sound.

We recommend that you select a Sound Effect based on the
source material and your personal taste.

When you choose a Sound Effect mode (except STANDARD), 3D
Sound Plus will automatically be turned OFF.

Once ASC calibration is completed, the ASC mode will be added.