Software Upgrade - Samsung HW-F350 Mode D'emploi

functions
HW-F350 OPTICAL OPTICAL AUX AUX USB TV SOURCE USB TV SOURCE
AUTO POWER AUTO POWER
REPEAT REPEAT
TV VOL TV VOL TV VOL TV CH TV CH TV CH
TV MUTE TV MUTE TV INFO TV INFO TV INFO TV PRE-CH TV EXIT TV PRE-CH TV EXIT TV PRE-CH TV EXIT
HW-F355 USB/ USB/
OPTICAL OPTICAL AUX AUX
AUTO POWER SoundShare AUTO POWER SoundShare
REPEAT REPEAT
TV VOL TV VOL TV VOL TV CH TV CH TV CH
TV MUTE TV MUTE TV INFO TV INFO TV INFO TV PRE-CH TV PRE-CH TV PRE-CH

SOFTWARE UPGRADE

Samsung may offer upgrades for the Crystal Surround Air Track's system
firmware in the future.
If an upgrade is offered, you can upgrade the firmware by connecting a USB
drive with the firmware upgrade stored on it to the USB port on your Air
Track.
Note that if there are multiple upgrade files, you must load them onto the
USB drive singly and use them to upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung call center to receive
more information about downloading upgrades files.
▪
Insert a USB drive containing the firmware upgrade into the USB port on the main unit.
▪
Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn
off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
▪
Once upgrading the product software is completed, turn off the product and then press and hold (@) button for
a while to reset the product.
▪
If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.
▪
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
▪
Depending on the manufacturer, some USB devices may not be supported.
20
Using the TV functions (with Samsung TVs only)
TV SOURCE
• Press TV SOURCE on the remote control to change the TV's input
DIMMER DIMMER
source.
AUDIO SYNC AUDIO SYNC
• Press TV INFO on the remote control to display the TV channel
information.
• Press TV CH on the remote control to select the TV channel.
• Press TV VOL on the remote control to increase or decrease the volume
TV SOURCE TV SOURCE TV SOURCE
level.
• Use TV PRE-CH button to move to the previous TV channel in TV mode.
• To exit the TV menu, use the TV EXIT button. (It functions the same as the
AUDIO SYNC AUDIO SYNC
EXIT button of the TV remote control.)
DIMMER DIMMER
▪
When you press the SoundShare button, the TV's sound is
transmitted through the Air Track system via a Bluetooth
connection. The Air Track also controls the sound volume,
sound quality, etc.
▪
The remote control can operate TVs made by SAMSUNG only.