Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12
Finishing
Glass Ember Installaion
EN
WARNING!
WARNING!
Do not change or subsitute the glass ember material provided with this appliance. If replacing, use
only replacement glass embers available from your local authorized dealer / distributor.
WARNING!
Clean the glass with mild dish soap, drain, rinse thoroughly and dry before installing.
1. Carefully pour the glass embers onto the appliance ember tray as shown.
2. Spread the glass embers over the tray and burner. The distribuion of clear glass over the burner will
inluence lame height.
3. The glass embers must cover the enire burner tray while ensuring no glass is placed on the igniion
porion of the burner as illustrated below.
www.napoleongrills.com
Do not use the paio lame without the glass embers in place.
Glass embers may have sharp edges, wear safety glasses and gloves when handling.
Glass embers may have a ine oil residue that needs to be cleaned prior to installaion.
ENSURE NO GLASS IS BLOCKING ANY OF THE OPEN PORTS ON THE IGNITION
PORTION OF THE BURNER, DIFFICULTIES IN LIGHTING MAY RESULT.
Publicité
Table des Matières
