Napoleon MADR1 Mode D'emploi page 10

Masquer les pouces Voir aussi pour MADR1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10
Conversion to Natural Gas
WARNING!
EN
lame is . Ensure burner is turned of. Turn gas of at source and disconnect the paio lame before
beginning conversion.
WARNING!
WARNING!
be leak tested before operaing the paio lame.
Your paio lame can be easily converted to natural gas by following these steps:
1. Remove the glass embers from the burner.
2. Remove the burner from the enclosure. Take care not to damage or kink the thermocouple wire.
3. Disconnect the stainless steel lex connector from the oriice using (2) wrenches.
4. Unscrew the propane oriice from the inside of the burner as illustrated.
5. Replace the propane oriice with the natural gas oriice supplied.
Note: The air shuter has been factory set and does not need to be adjusted.
www.napoleongrills.com
To avoid the possibility of burns conversions should only be done when the paio
Glass embers may have sharp edges wear safety glasses and gloves when handling.
This conversion must be performed by a licensed gas iter, and all connecions must

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Madr2Gpfr40Gpfs40

Table des Matières