Setting Of Cooling Compartment Temperature; Rm 8Xx5 Models; Explanation Of Operating Controls; Manual Operation - Dometic RM 8501 Mode D'emploi

4.6.4 Setting of cooling compartment
temperature
6
Select the desired cooling compartment tem-
perature by pressing button (6) .
The LED display (7) of the selected temperatu-
re setting is illuminated.
The scale starts with MIN position at the left
LED position (small bar = highest temperature)
and climbs up to MAX position at the right
LED position (large bar = lowest temperature).
Note: The temperature levels do not relate to
absolute temperature values.
4.7 Operation RM 8xx5 models

4.7.1 Explanation of operating controls

Automatic energy selection / automatic
ignition (RM 8xx5) AES :
1 2 3 4
1
= Power ON/OFF switch
2
= Energy selector button
3
= Energy selector button
4 = Energy selector button
= Selector button "AUTOMATIC"
5
= Temperature level selection
6
= Temperature level display
7
= Indicator LED failure /
8
Reset button GAS FAILURE
7
7
5 6
Fig. 10
120V ~
GAS
12V =
Switching ON/OFF
Switch ON by pressing button (1), 2s
Switch OFF by pressing button (1), > 2s

Manual operation

Select energy source with buttons (2,3,4)
Set temperature step by pressing button (6)
Fig. 9
Automatic operation
Change over to "Automatic" with button (5)
Set temperature step by pressing button (6)
4.7.2 Manual operation
1
To start the refrigerator, press button (1) for 2
seconds.
120V operation :
Press button (2) :
12V operation :
Press button (4) :
Gas operation :
Press button (3) :
8
17
Refrigerator operation
2
3 4
Fig. 11