Maintenance And Service; Standard Libero/Artcool Libero Type; Cleaning The Air Filter - LG AMNW09GDBL0 Manuel Du Propriétaire

Maintenance and Service

Maintenance and Service
Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and
unplug the power cord.

Standard Libero/Artcool Libero Type

Clean the unit with a soft dry cloth. Do not use bleach or abrasives.
Never use any of these
• Water hotter than 40°C(104°F). It may cause deformation and discoloration.
• Volatile substances. They may damage the surface of the air conditioner.

Cleaning the air filter

Clean the air filter once every 2 weeks or
more if necessary.
1. Turn off the power and unplug the power
cord.
2. Open the front cover.
- Lift up both sides of the cover slightly.
3. Hold the knob of the air filter, lift it up slightly
and remove it from the unit.
4. Clean the filter with a vacuum cleaner or
with warm water.
- If dirt is difficult to remove, wash the filter
in lukewarm water with detergent.
5. Dry the filter in the shade.
22 Multi Air Conditioner
Cleaning the plasma filter
1. Turn off the power and unplug the power
cord.
2. Open the front cover and remove the air
filter (see "Cleaning air filter").
3. Remove the plasma filter in 10 seconds.
4. Use a vacuum cleaner to remove any dirt.
- If dirt is difficult to remove, wash the filter
with lukewarm water.
5. Dry the filter in the shade.
NOTE
• The location of the filters may differ,
depending on the model.
• The plasma filter may not be included in some
models.